Setting up a Surround Sound Audio System For Your Car

For decades now people always push the car to limit their car stereo to produce the best sound. Cars of our grandparents with a big radio and their static-filled AM gave way to FM broadcasts and cassette stereo playing are our parents. Now automakers going digital by using not only the CD player with satellite radio compatibility but MP play.
Growing trend in the newest and hottest car audio right now is the idea of ​​the speaker surround sound system. The thinking behind it is to have all the speakers in your car set up exactly as it was surround sound audio system that you have in your living room. There is a reason why everyone wants one in their car. It just sounded amazing. Here is how you can go about bringing that experience of cinema sound into your daily commute to work.

    One of the first goals to check off your list is to find stereo head unit that allows you to wire the surround-sound processor. Because the processor will be digital head unit you will need to provide a digital signal. You will also need a fiber optic cable. They are used to transmit digital signals between components. If you previously purchased a nice head unit but can not provide a digital signal to get the CD changer with a fiber optic connection. Connect the processor to the CD changer unit but remember that you will not get surround-sound effect when you play the CD. You can always select a surround-sound processor that converts the digital signal into the RCA.
    Make sure your car is equipped with a high-end CD changer and / or play a DVD software that brings surround-sound signals.
    You must install five channel amplifier that can provide power for the front speakers rear speakers and sub woofer. Every corner of the car plus the sub woofer would be a separate channel.
    Center channel should have - to-inch mid range speakers and tweeters. This type of combination should be at home and placed in the center of the dashboard of a car.
    You now need to install an amplifier to run a center-channel speaker. You can get away with a two-channel mono amplifier to play bridge but it contains an electronic Crossover can paste or built into the amplifier.

source : http://www.beta-audio.web.id