How to paint a true

Seeing a car with bright color is beautiful, a lot of people change the color of his car with a bright color to make it look fresh in the eyes and impressive, but how do I paint a good car in order to get maximum results?, The following tips:
1. emery first parts to be painted with sandpaper (paper rub) the waterproof size 800, then smoothed with sandpaper size / no. 1000.2. after the surface has been rubbed with sandpaper washing parts to be painted with water, dried with a cloth, and heated in the sun until completely dry.3. paint the desired surface with Epoxy after, drying section tercat was then scrub again with sandpaper with sandpaper size 1200, and do not get out enough to flat surface.4. after washing sanded parts with clean water and dry in the sun to dry and cleaned with a soft cloth such as linen shirts.5. then entered the stage of painting using the desired primer can be white or gray, I used menggunakaan brands Avian or steel gloss and painted in place an open order to avoid exposure to direct sunlight and dust media, after drying painted TSB section until it is completely dry, and sandpaper again to get the in-depth, but with sandpaper no.> 1200 and keep in mind the process of sanding is quite thin.6. entered in the dyeing process choose colors that match the desire and the more diluted the mixture to paint ordinary sy wears a size 1 liter in 4 liters of paint thiner Super A, and in the process of painting is quite interesting quake 1 syringe of paint should not be repeated in order to look rata.kemudian drying up were really dry.7. after dry then we enter the process in order to ascertain bgus lacquer varnish to select good brands such as Avian S4000 Or Blinken and the results of our vehicles as though not given a glossy oil washed.
Such tips may be useful to you in the car paint to give the impression of pulling on your car, find relevant information about cars,